Look At It From A Different Angle: How To Get Started With Your New 3D Printer
If you've recently purchased a 3D printer, and you want to start making amazing projects, you'll want to take it slow to begin with. Using a 3D printer isn't anything like using your typical laser printer. It's going to take some time to get you up to speed with your new gadget. Don't give up though. With a little time and effort, you'll get the hang of it. Here are three crucial steps that will help you adjust to your new 3D printer.
Start with the Right Calibration
When you took your first laser printer out of the box, the first thing you needed to do was calibrate the settings. In fact, your printer probably had you do a test run before you started using it. Your 3D printer is the same way. Before you can use your 3D printer services successfully, you'll need to make sure it's properly calibrated. If it's not, you'll end up with uneven edges, or incomplete projects. Calibrating your 3D printer will ensure that the the printer bed and the overhangs are adjusted properly. Once your 3D printer is calibrated, you'll be able to move on to the next phase.
Give Yourself Plenty of Practice
Now that you've got your printer calibrated properly, you can start familiarizing yourself with how everything works. Don't expect to be able to print something usable right from the start. The fact is that 3D printing requires a lot of practice. The best thing you can do is stock up on 3D printer filament and give yourself a few months to practice. Start out by learning how to navigate the system and move on from there. Once you perfect one portion of the program, move on to the next one. By the time you've completed your practice, you'll be ready for your first official 3D printing project.
Print Your Project One Piece at a Time
If you've decided to work on a detailed 3D project, don't try to complete the project in one piece. That's the best way to end up with a mess. It's also the best way to create so much frustration for yourself that you decide to throw in the towel and get rid of the printer. To alleviate the hassle, print your project one piece at a time. Printing the project piece by piece and then putting them all together will ensure a successful project. Not only that, but it's also easier to reprint one small piece that didn't come out right than it is to reprint the entire project.